Mercruiser Service Menu 2017-11-12T16:43:38+00:00

Mercruiser Service Menu

5 qts of 25W40 Engine Oil , Oil Filter , Fuel Water Separator , Gear Lube 

Includes : Inspection of motor & vessel with assessment of future services ; Prop removal to inspect prop seals , clean any debris found on prop shaft , clean / grease prop shaft and replace prop tab washer ;  Drain / replace gear lube & gaskets  ; Drain / replace engine oil & filter ; degreasing of engine bilge & components ; CRC corrosion treatment ; Top off power trim fluid level ;  Replace fuel water separator ;  Test Run

$241.65 (tax incl.)

*Some V8 engines ( 7.4 ~ ) requiring more than 5 qts of 25W40 & Bravo drives will have additional oil capacity charge.

*Oil filter & Fuel water separator upgrades will be additional according to pricing , For Example : Racor or High Capacity Filters

*OEM or Amsoil Synthetic oil’s are available on request ,  additional $10-30 based on capacity & selection.

Std. OEM Oil & Filters on request , additional $12.00

* Mann Marine Service Dept. uses Sierra 25W40 Lubes & Filters , click here for more information on Sierra branded oils and lubes.

ALPHA DRIVES 

R / MR / ALPHA I (83-90) ~ Impeller & Gear Lube  $254.51

Alpha I Gen II (91-Current) ~ Impeller & Gear Lube $259.84

*Impeller price does not include any housing gaskets , if impeller kit is needed additional $9.95 will apply

 

Alpha I  / MR / ALPHA I (83-90) ~ Water Pump Kit & Gear Lube $275.28

Alpha I Gen II (91-Current) ~ Water Pump Kit & Gear Lube $307.35

Basic : Antifreeze , Fogging Oil , Fuel Stabilizer , Prop Grease , Corrosion Guard

$144.94

Basic with Gear Lube

 $188.60

Basic with Annual Service 

$344.99

 

 

** Units with saltwater corrosion / rust or the like will incur additional labor charges as needed. For Example : Oil or  fuel filters that need to be cut free due  , water pump housing bolts seized due to corrosion , gear case drain plugs stripped.

** Units with non-accessible hull designs that require disassembly will incur additional labor charges as needed. For Example : Tight engine compartments that require removal of bench seats , sundecks , etc.

**Heavily soiled , molded , trashy bilge areas and engines will incur additional charge if degreasing & treatment is included with service estimate , if you decline this additional charge will wash out with water and leave as is.